Feature：
1. Built-in charging function, built-in UPS function, built-in high-frequency inverter technology.
2. Purchasing portable lithium battery technology, which greatly reduces the volume and weight of the product.
3. Adopt the charging and use technology, which is convenient for users to use.
4. A variety of charging methods, including mains charging, solar charging, and vehicle charging.
5. Aluminum alloy shell, it can be used even at high temperature.
6. While using AC output, you can also use DC 12V, QC3.0*2 TYPE-65W*2, LED lighting.
7. The current data is displayed at all times, the voltage is low, there is an alarm prompt; the temperature is high, there is overheat protection; there is power protection for overload, power protection is for input, and there is protection after short circuit.
8. The products have been tested by the national certification body, and the quality is guaranteed
9. Flashlight function
Specication:
Battery capacity: 1065.6Wh 288000mAh
Output power: Rated 1000W, Maximum 1030W overload protection
Input voltage: AC 110V 50/60Hz
Output voltage: 110V 60Hz
DC output: two 12V DC outputs, two QC3.0 outputs, two PD65W outputs
LED light: 1W
Solar charging: between standard 24V-30V, total power does not exceed 240W (solar charging port is 1 positive and 2 negative)
Car charging: using solar charging ports, allowing small 12V and large cars 24V charging, the maximum charging power is 100W (car chargers are solar charging ports 3 positive and 4 negative)
Output waveform: AC pure sine wave
UPS switching time: within 10 milliseconds
AC overload: no output after overload, disconnect the load, restart to recover
AC short circuit: AC output short circuit is strictly prohibited, short circuit will damage the machine
Lithium battery: Cycle life more than 800 times
Weight: 9.0kg
Size: 37*14*16.7cm
1 Solar charging standards
A, the circuit is designed as PWM mode
B. The solar input voltage range is 24-30V.
C, the maximum allowable power to be charged into the battery does not exceed 240W
D. Too high voltage or too much power may cause damage to the internal circuit
2 Charging standards for car chargers
A. Car charging is suitable for 12V small cars and large 24V cars.
B. Car charging power is 100W.
3 Mains charging time
A, charging current 6.0A/150W, charging to more than 90% in 7 hours
B. When the battery level is displayed as 100%, it can be used.
C. The standard for fully charged is that the charging indicator turns green, and the time is 8-9 hours.